About FAQ Support/Feedback
Ferret Logo
Search by Target Search by Properties Advanced Search Data Sets

Asteroid 2576 Yesenin

Alternate IDs:
1966 BQ, 1974 QL, 1957 LC, 1969 RC2, 1957 MJ

Data sets with data for Asteroid 2576 Yesenin:

Asteroid 2576 Yesenin (top)

2MASS Asteroid and Comet Survey V2.0 (1 data product)

J MAGNITUDE 2MASS * J band selected magnitude in the 2MASS survey, or if the source is not detected in the J-band, the 95% confidence upper limit derived from a 4 arcsec radius aperture measurement taken at the position of the source on the Atlas Image. (The Atlas Images are quick-look images suitable for deriving positional information but not accurate photometry.) The origin of the magnitude is given by the first character of the rd_flg value.
(MAGNITUDE) 		J MAGNITUDE 2MASS UNC * Corrected photometric uncertainty for the J-band magnitude in the 2MASS survey. If rd_flg[1]=2, this is the measurement error from the profile-fitting procedure, corrected to be consistent with observed repeatability statistics. If rd_flg[1]=1 or 4, this is the RMS of the brightness measured in aperture photometry on the individual frames. If rd_flg=3, the uncertainty is derived from the residuals to the 1-d radial profile fit (averaging over azimuth) to the unsaturated wings of the bright source. If J_MAG_SIG > 8.0, it is a flag value indicating that a meaningful uncertainty could not be determined for the source. This column is null if the magnitude is a 95% confidence upper limit (rd_flg[1]=0 or 6) or if the source is not measurable (rd_flg[1]=9).
(MAGNITUDE) 		H MAGNITUDE 2MASS * H band selected magnitude in the 2MASS survey, or if the source is not detected in the H-band, the 95% confidence upper limit derived from a 4 arcsec radius aperture measurement taken at the position of the source on the Atlas Image. (The Atlas Images are quick-look images suitable for deriving positional information but not accurate photometry.) The origin of the magnitude is given by the second character of the rd_flg value.
(MAGNITUDE) 		H MAGNITUDE 2MASS UNC * Corrected photometric uncertainty for the H-band magnitude in the 2MASS survey. If rd_flg[2]=2, this is the measurement error from the profile-fitting procedure, corrected to be consistent with observed repeatability statistics. If rd_flg[2]=1 or 4, this is the RMS of the brightness measured in aperture photometry on the individual frames. If rd_flg=3, the uncertainty is derived from the residuals to the 1-d radial profile fit (averaging over azimuth) to the unsaturated wings of the bright source. If H_MAG_SIG > 8.0, it is a flag value indicating that a meaningful uncertainty could not be determined for the source. This column is null if the magnitude is a 95% confidence upper limit (rd_flg[2]=0 or 6) or if the source is not measurable (rd_flg[2]=9).
(MAGNITUDE) 		KS MAGNITUDE 2MASS * Ks band selected magnitude in the 2MASS survey, or if the source is not detected in the Ks-band, the 95% confidence upper limit derived from a 4 arcsec radius aperture measurement taken at the position of the source on the Atlas Image. (The Atlas Images are quick-look images suitable for deriving positional information but not accurate photometry.) The origin of the magnitude is given by the third character of the rd_flg value.
(MAGNITUDE) 		KS MAGNITUDE 2MASS UNC * Corrected photometric uncertainty for the Ks-band magnitude in the 2MASS survey. If rd_flg[3]=2, this is the measurement error from the profile-fitting procedure, corrected to be consistent with observed repeatability statistics. If rd_flg[3]=1 or 4, this is the RMS of the brightness measured in aperture photometry on the individual frames. If rd_flg=3, the uncertainty is derived from the residuals to the 1-d radial profile fit (averaging over azimuth) to the unsaturated wings of the bright source. If KS_MAG_SIG > 8.0, it is a flag value indicating that a meaningful uncertainty could not be determined for the source. This column is null if the magnitude is a 95% confidence upper limit (rd_flg[3]=0 or 6) or if the source is not measurable (rd_flg[3]=9).
(MAGNITUDE)
14.379 0.031 14.035 0.046 13.863 0.056
14.421 0.029 14.047 0.053 13.996 0.060
16.093 0.093 15.644 0.126 15.485

Asteroid 2576 Yesenin (top)

Asteroid Absolute Magnitudes V12.0 (1 data product)

ABSOLUTE VISUAL MAGNITUDE * IAU-adopted absolute V magnitude (H)
(MAGNITUDE) 		SLOPE PARAMETER * IAU-adopted slope parameter (G) SLOPE PARAMETER ORIGIN FLAG * Those slope parameters that were determined by fitting the IAU-adopted phase function to data are given an origin code letter of 'f' (for 'fitted'); all others are given a code letter of 'a' (for 'assumed'). MPC REFERENCE * Minor Planet Circular (MPC) or Minor Planet Orbit Supplement (MPO) reference
11.3 0.15 a MPC 17266

Asteroid 2576 Yesenin (top)

Asteroid Dynamical Families V4.1 (1 data product)

ZAPPALA FAMILY NAME * Familiy name in the family analysis of Zappala et al. (1995) ZAPPALA CLUMP FLAG * Indicates whether the Zappala family designation is a clump or a family, as defined in Zappala et al. (1995). F = family, C = clump. ZAPPALA FAMILY CONFIDENCE LEVEL * Confidence level of Zappala family membership, defined as quality code (QC) in Zappala et al. 1995.
Asta C

Asteroid 2576 Yesenin (top)

Asteroid Lightcurve Derived Data V16.0 (1 data product)

LC PERIOD FLAG * Flag referring to the sidereal period given in the asteroid lightcurve parameters file, taking the following values: > - less than < - greater than D - no numeric value (see P_NOTE for details) S - sidereal period (default is synodic period) U - period uncertain This is not the same as ambiguous where one or more additional periods are reported. LC PERIOD NOTE * Note with further information about the period given in the asteroid lightcurve parameters file. LC PERIOD * Rotation period of the asteroid about its axis, in hours, in the asteroid lightcurve parameters file. The period given is synodic unless the S flag (sidereal) is set in P_FLAG.
(HOUR) 		LC PERIOD ERR * Error in the rotational period given in the asteroid lightcurve parameters file.
(HOUR) 		LC AMPLITUDE FLAG * A flag pertaining to the amplitude of the lightcurve in the asteroid lightcurve parameters file, given in AMP_MIN and AMP_MAX. < - less than > - greater than LC AMPLITUDE MINIMUM * Lightcurve amplitude minimum, in the asteroid lightcurve parameters file. In the cases where a range of amplitude is given, this is the lower limit of the range. For individual observations for which a single value of the amplitude is given, this field contains a null value.
(MAGNITUDE) 		LC AMPLITUDE MAXIMUM * Lightcurve amplitude maximum in the asteroid lightcurve parameters file. In cases where a range of amplitudes is given, this field is the upper limit of the range. In cases where a single value is given for the amplitude, this field is that value and a null value is given for AMP_MIN. Both AMP_MIN and AMP_MAX contain a null value if the publication did not include an amplitude.
(MAGNITUDE) 		LC AMPLITUDE ERR * Error in the lightcurve amplitudes given in the asteroid lightcurve parameters file.
(MAGNITUDE) 		LC QUALITY CODE * This code describes the reliability of the lightcurve results in the asteroid lightcurve parameters file, and takes the following values: 0 - Result later proven incorrect. This appears only on records of individual observations. 1 - Result based on fragmentary lightcurve(s), may be completely wrong. 2 - Result based on less than full coverage, so that the period may be wrong by 30 percent or so. Also, a quality of 2 is used to note results where an ambiguity exists as to the number of extrema per cycle or the number of elapsed cycles between lightcurves. Hence the result may be wrong by an integer ratio. 3 - Denotes a secure result with no ambiguity and full lightcurve coverage. 4 - In addition to full coverage, denotes that a pole position is reported. In some cases, the numerical quality code may be followed by a plus or minus sign, indicating that the reliability is judged somewhat better (+) or worse (-) than implied by an un-signed number alone. This refinement in scale has been only recently added, and not yet retroactively, so most entries don't have signs, even in some cases where they would be appropriate. LC NOTES * Notes pertaining to the lightcurve reported in the asteroid lightcurve parameters file. These are one-letter flags, one or more of which may appear in the column. ? - Usually tied with 'T' to indicate uncertainty. 1 - Monomodal curve (one min/max per rotation) 3 - Trimodal curve (three min/max per rotation) 4 - Quadrimodal curve (four min/max per rotation) A - Ambiguous period D - Period determined by us that differs from that given in the original publication E - Occultation observation H - Space telescope observations I - IR/Thermal observations M - Polarimetric observation N - No lightcurve published O - Adaptive optics observation P - Photographic photometry R - Radar observation T - Tumbling (Non-principal axis rotation - see lc_npa.tab for details) V - Visual photometry Additional flags associated with the T flag are as follows: None after the T - The asteroid is definitely tumbling ? : Possible tumbler 0 : The tumbling damping timescale is long enough that tumbling might be expected, but observations are not sufficient to substantiate either tumbling or not tumbling. - : The tumbling damping timescale is long enough that tumbling might be expected, but observations indicate the object is NOT tumbling. + : The tumbling damping timescale is short enough that tumbling would not seem likely, however, observations indicate that it may be tumbling or actually is tumbling. LC BINARY FLAG * Note regarding binarity in the asteroid lightcurve parameters file: ? - Possible, usually due to lacking mutual eclipse/occultation events B - Binary system M - Multiple system, more than two LC REFERENCE ID * A short version of the reference citation for the published paper in which the values in this entry (in the asteroid lightcurve parameters file) were reported. The full citations may be found in the file lc_references.tab.
. I WISE
271.9736 11.4115 0.34 2 Waszczak 2016

Asteroid 2576 Yesenin (top)

Asteroid Names and Discovery V12.0 (1 data product)

DISCOVERY DATE * Date of discovery of an object DISCOVERY LOCATION * Location where the discovery observation of an object was made DISCOVERER NAMES * The name(s) of the discoverer(s) of an object
1974-08-17 Nauchnyj Zhuravleva, L.

Asteroid 2576 Yesenin (top)

NEOWISE Diameters and Albedos V1.0 (1 data product)

NEOWISE DIAMETER * NEOWISE best-fit effective spherical diameter, or assumed value if not fitted.
(KILOMETER) 		NEOWISE DIAMETER UNCERTAINTY * NEOWISE unceratinty in the best-fit effective spherical diameter, or assumed value if not fitted.
(KILOMETER) 		NEOWISE V ALBEDO * NEOWISE best-fit visible geometric albedo, or assumed value if not fitted. NEOWISE V ALBEDO UNCERTAINTY * NEOWISE uncertainty of the best-fit visible geometric albedo, or assumed value if not fitted. NEOWISE THERMAL BEAMING PARAMETER * NEOWISE best-fit NEATM thermal beaming parameter, or assumed value if not fitted. NEOWISE THERMAL BEAMING PARAMETER UNCERTAINTY * NEOWISE uncertainty of the best-fit NEATM thermal beaming parameter, or assumed value if not fitted. NEOWISE REFERENCE CODE * NEOWISE reference code to the original publication of fitted parameters. See the refrence.tab in the dataset for the full reference
27.887 0.178 0.073 0.009 0.767 0.009 Mas14
32.142 10.383 0.055 0.053 0.950 0.207 Nug15

Asteroid 2576 Yesenin (top)

NEOWISE Diameters and Albedos V2.0 (1 data product)

ABSOLUTE VISUAL MAGNITUDE * IAU-adopted absolute V magnitude (H)
(magnitudes) 		SLOPE PARAMETER * IAU-adopted slope parameter (G) OBSERVATION DATE * Date of observation
(day) 		NEOWISE DIAMETER * NEOWISE best-fit effective spherical diameter, or assumed value if not fitted.
(kilometer) 		NEOWISE DIAMETER UNCERTAINTY * NEOWISE unceratinty in the best-fit effective spherical diameter, or assumed value if not fitted.
(kilometer) 		NEOWISE V ALBEDO * NEOWISE best-fit visible geometric albedo, or assumed value if not fitted. NEOWISE V ALBEDO UNCERTAINTY * NEOWISE uncertainty of the best-fit visible geometric albedo, or assumed value if not fitted. NEOWISE THERMAL BEAMING PARAMETER * NEOWISE best-fit NEATM thermal beaming parameter, or assumed value if not fitted. NEOWISE THERMAL BEAMING PARAMETER UNCERTAINTY * NEOWISE uncertainty of the best-fit NEATM thermal beaming parameter, or assumed value if not fitted. NEOWISE REFERENCE CODE * NEOWISE reference code to the original publication of fitted parameters. See the refrence.tab in the dataset for the full reference
11.30 +0.15 2455334.3219800 27.887 0.178 0.073 0.009 0.767 0.009 Mas14
11.20 +0.15 2456710.1279324 32.142 10.383 0.055 0.053 0.950 0.200 Nug15

Asteroid 2576 Yesenin (top)

Near-Infrared Photometry of Asteroids From DENIS V1.0 (1 data product)

OBSERVATION DATE * Date of observation
(DAY) 		DENIS I MAGNITUDE * I magnitude in the DENIS (Deep European Near-Infrared southern sky) survey.
(MAGNITUDE) 		DENIS I MAGNITUDE ERROR * Error in the I magnitude in the DENIS (Deep European Near-Infrared southern sky) survey.
(MAGNITUDE) 		DENIS J MAGNITUDE * J magnitude in the DENIS (Deep European Near-Infrared southern sky) survey.
(MAGNITUDE) 		DENIS J MAGNITUDE ERROR * Error in the J magnitude in the DENIS (Deep European Near-Infrared southern sky) survey.
(MAGNITUDE) 		DENIS KS MAGNITUDE * Ks magnitude in the DENIS (Deep European Near-Infrared southern sky) survey.
(MAGNITUDE) 		DENIS KS MAGNITUDE ERROR * Error in the Ks magnitude in the DENIS (Deep European Near-Infrared southern sky) survey.
(MAGNITUDE)
2451633.753773 15.40 0.04 14.86 0.13 99.99 9.99


About FAQ Support/Feedback Acknowledgment
Planetary Data System - Small Bodies Node
Nasa Logo