About FAQ Support/Feedback
Ferret Logo
Search by Target Search by Properties Advanced Search Data Sets

Asteroid 3945 Gerasimenko

Alternate IDs:
1980 FM1, 1982 PL, 1971 TD2

Data sets with data for Asteroid 3945 Gerasimenko:

Asteroid 3945 Gerasimenko (top)

2MASS Asteroid and Comet Survey V2.0 (1 data product)

J MAGNITUDE 2MASS * J band selected magnitude in the 2MASS survey, or if the source is not detected in the J-band, the 95% confidence upper limit derived from a 4 arcsec radius aperture measurement taken at the position of the source on the Atlas Image. (The Atlas Images are quick-look images suitable for deriving positional information but not accurate photometry.) The origin of the magnitude is given by the first character of the rd_flg value.
(MAGNITUDE)
J MAGNITUDE 2MASS UNC * Corrected photometric uncertainty for the J-band magnitude in the 2MASS survey. If rd_flg[1]=2, this is the measurement error from the profile-fitting procedure, corrected to be consistent with observed repeatability statistics. If rd_flg[1]=1 or 4, this is the RMS of the brightness measured in aperture photometry on the individual frames. If rd_flg=3, the uncertainty is derived from the residuals to the 1-d radial profile fit (averaging over azimuth) to the unsaturated wings of the bright source. If J_MAG_SIG > 8.0, it is a flag value indicating that a meaningful uncertainty could not be determined for the source. This column is null if the magnitude is a 95% confidence upper limit (rd_flg[1]=0 or 6) or if the source is not measurable (rd_flg[1]=9).
(MAGNITUDE)
H MAGNITUDE 2MASS * H band selected magnitude in the 2MASS survey, or if the source is not detected in the H-band, the 95% confidence upper limit derived from a 4 arcsec radius aperture measurement taken at the position of the source on the Atlas Image. (The Atlas Images are quick-look images suitable for deriving positional information but not accurate photometry.) The origin of the magnitude is given by the second character of the rd_flg value.
(MAGNITUDE)
H MAGNITUDE 2MASS UNC * Corrected photometric uncertainty for the H-band magnitude in the 2MASS survey. If rd_flg[2]=2, this is the measurement error from the profile-fitting procedure, corrected to be consistent with observed repeatability statistics. If rd_flg[2]=1 or 4, this is the RMS of the brightness measured in aperture photometry on the individual frames. If rd_flg=3, the uncertainty is derived from the residuals to the 1-d radial profile fit (averaging over azimuth) to the unsaturated wings of the bright source. If H_MAG_SIG > 8.0, it is a flag value indicating that a meaningful uncertainty could not be determined for the source. This column is null if the magnitude is a 95% confidence upper limit (rd_flg[2]=0 or 6) or if the source is not measurable (rd_flg[2]=9).
(MAGNITUDE)
KS MAGNITUDE 2MASS * Ks band selected magnitude in the 2MASS survey, or if the source is not detected in the Ks-band, the 95% confidence upper limit derived from a 4 arcsec radius aperture measurement taken at the position of the source on the Atlas Image. (The Atlas Images are quick-look images suitable for deriving positional information but not accurate photometry.) The origin of the magnitude is given by the third character of the rd_flg value.
(MAGNITUDE)
KS MAGNITUDE 2MASS UNC * Corrected photometric uncertainty for the Ks-band magnitude in the 2MASS survey. If rd_flg[3]=2, this is the measurement error from the profile-fitting procedure, corrected to be consistent with observed repeatability statistics. If rd_flg[3]=1 or 4, this is the RMS of the brightness measured in aperture photometry on the individual frames. If rd_flg=3, the uncertainty is derived from the residuals to the 1-d radial profile fit (averaging over azimuth) to the unsaturated wings of the bright source. If KS_MAG_SIG > 8.0, it is a flag value indicating that a meaningful uncertainty could not be determined for the source. This column is null if the magnitude is a 95% confidence upper limit (rd_flg[3]=0 or 6) or if the source is not measurable (rd_flg[3]=9).
(MAGNITUDE)
13.986 0.023 13.545 0.034 13.410 0.042
15.837 0.068 15.290 0.092 15.224 0.148
15.902 0.075 15.503 0.128 15.370 0.198
15.923 0.066 15.481 0.111 15.532 0.200
15.923 0.070 15.691 0.152 15.019 0.141
15.953 0.071 15.384 0.137 15.343 0.193
15.981 0.081 15.518 0.123 15.166 0.170
15.992 0.081 15.520 0.126 15.167 0.143
16.012 0.076 15.816 0.159 15.105 0.138
16.032 0.084 15.587 0.114 15.173 0.171
16.037 0.076 15.537 0.115 15.357 0.184
16.062 0.082 15.604 0.118 15.314 0.185
16.146 0.084 15.574 0.121 15.292 0.179
16.167 0.088 15.625 0.150 15.344 0.185

Asteroid 3945 Gerasimenko (top)

Asteroid Lightcurve Derived Data V16.0 (1 data product)

LC PERIOD FLAG * Flag referring to the sidereal period given in the asteroid lightcurve parameters file, taking the following values: > - less than LC PERIOD NOTE * Note with further information about the period given in the asteroid lightcurve parameters file. LC PERIOD * Rotation period of the asteroid about its axis, in hours, in the asteroid lightcurve parameters file. The period given is synodic unless the S flag (sidereal) is set in P_FLAG.
(HOUR)
LC PERIOD ERR * Error in the rotational period given in the asteroid lightcurve parameters file.
(HOUR)
LC AMPLITUDE FLAG * A flag pertaining to the amplitude of the lightcurve in the asteroid lightcurve parameters file, given in AMP_MIN and AMP_MAX. - greater than LC AMPLITUDE MINIMUM * Lightcurve amplitude minimum, in the asteroid lightcurve parameters file. In the cases where a range of amplitude is given, this is the lower limit of the range. For individual observations for which a single value of the amplitude is given, this field contains a null value.
(MAGNITUDE)
LC AMPLITUDE MAXIMUM * Lightcurve amplitude maximum in the asteroid lightcurve parameters file. In cases where a range of amplitudes is given, this field is the upper limit of the range. In cases where a single value is given for the amplitude, this field is that value and a null value is given for AMP_MIN. Both AMP_MIN and AMP_MAX contain a null value if the publication did not include an amplitude.
(MAGNITUDE)
LC AMPLITUDE ERR * Error in the lightcurve amplitudes given in the asteroid lightcurve parameters file.
(MAGNITUDE)
LC QUALITY CODE * This code describes the reliability of the lightcurve results in the asteroid lightcurve parameters file, and takes the following values: 0 - Result later proven incorrect. This appears only on records of individual observations. 1 - Result based on fragmentary lightcurve(s), may be completely wrong. 2 - Result based on less than full coverage, so that the period may be wrong by 30 percent or so. Also, a quality of 2 is used to note results where an ambiguity exists as to the number of extrema per cycle or the number of elapsed cycles between lightcurves. Hence the result may be wrong by an integer ratio. 3 - Denotes a secure result with no ambiguity and full lightcurve coverage. 4 - In addition to full coverage, denotes that a pole position is reported. In some cases, the numerical quality code may be followed by a plus or minus sign, indicating that the reliability is judged somewhat better (+) or worse (-) than implied by an un-signed number alone. This refinement in scale has been only recently added, and not yet retroactively, so most entries don't have signs, even in some cases where they would be appropriate. LC NOTES * Notes pertaining to the lightcurve reported in the asteroid lightcurve parameters file. These are one-letter flags, one or more of which may appear in the column. ? - Usually tied with 'T' to indicate uncertainty. 1 - Monomodal curve (one min/max per rotation) 3 - Trimodal curve (three min/max per rotation) 4 - Quadrimodal curve (four min/max per rotation) A - Ambiguous period D - Period determined by us that differs from that given in the original publication E - Occultation observation H - Space telescope observations I - IR/Thermal observations M - Polarimetric observation N - No lightcurve published O - Adaptive optics observation P - Photographic photometry R - Radar observation T - Tumbling (Non-principal axis rotation - see lc_npa.tab for details) V - Visual photometry Additional flags associated with the T flag are as follows: None after the T - The asteroid is definitely tumbling ? : Possible tumbler 0 : The tumbling damping timescale is long enough that tumbling might be expected, but observations are not sufficient to substantiate either tumbling or not tumbling. - : The tumbling damping timescale is long enough that tumbling might be expected, but observations indicate the object is NOT tumbling. + : The tumbling damping timescale is short enough that tumbling would not seem likely, however, observations indicate that it may be tumbling or actually is tumbling. LC BINARY FLAG * Note regarding binarity in the asteroid lightcurve parameters file: ? - Possible, usually due to lacking mutual eclipse/occultation events B - Binary system M - Multiple system, more than two LC REFERENCE ID * A short version of the reference citation for the published paper in which the values in this entry (in the asteroid lightcurve parameters file) were reported. The full citations may be found in the file lc_references.tab.
. I Masiero 2012
. I WISE
272.3316 2.1968 0.61 2 Waszczak 2016
274.3899 2.4077 0.68 2 Waszczak 2016
. N Veres 2015

Asteroid 3945 Gerasimenko (top)

Asteroid Names and Discovery V12.0 (1 data product)

Asteroid 3945 Gerasimenko (top)

NEOWISE Diameters and Albedos V2.0 (1 data product)

ABSOLUTE VISUAL MAGNITUDE * IAU-adopted absolute V magnitude (H)
(magnitudes)
SLOPE PARAMETER * IAU-adopted slope parameter (G) OBSERVATION DATE * Date of observation
(day)
NEOWISE DIAMETER * NEOWISE best-fit effective spherical diameter, or assumed value if not fitted.
(kilometer)
NEOWISE DIAMETER UNCERTAINTY * NEOWISE unceratinty in the best-fit effective spherical diameter, or assumed value if not fitted.
(kilometer)
NEOWISE V ALBEDO * NEOWISE best-fit visible geometric albedo, or assumed value if not fitted. NEOWISE V ALBEDO UNCERTAINTY * NEOWISE uncertainty of the best-fit visible geometric albedo, or assumed value if not fitted. NEOWISE THERMAL BEAMING PARAMETER * NEOWISE best-fit NEATM thermal beaming parameter, or assumed value if not fitted. NEOWISE THERMAL BEAMING PARAMETER UNCERTAINTY * NEOWISE uncertainty of the best-fit NEATM thermal beaming parameter, or assumed value if not fitted. NEOWISE REFERENCE CODE * NEOWISE reference code to the original publication of fitted parameters. See the refrence.tab in the dataset for the full reference
12.30 +0.15 2455409.4349970 20.796 0.203 0.062 0.005 0.858 0.008 Mas11
12.30 +0.15 2455587.1091355 20.966 0.275 0.048 0.010 1.000 0.200 Mas12
12.40 +0.15 2457332.4506352 21.538 8.277 0.056 0.033 0.950 0.200 Nug16
12.40 +0.15 2457146.6951049 16.924 3.739 0.067 0.040 0.950 0.200 Nug16


About FAQ Support/Feedback Acknowledgment