About FAQ Support/Feedback
Ferret Logo
Search by Target Search by Properties Advanced Search Data Sets

Asteroid 6719 Gallaj

Alternate IDs:
1992 EP18, 1992 CE5, 1990 WM9, 1990 UL11, 1985 SO4

Data sets with data for Asteroid 6719 Gallaj:

Asteroid 6719 Gallaj (top)

2MASS Asteroid and Comet Survey V2.0 (1 data product)

J MAGNITUDE 2MASS * J band selected magnitude in the 2MASS survey, or if the source is not detected in the J-band, the 95% confidence upper limit derived from a 4 arcsec radius aperture measurement taken at the position of the source on the Atlas Image. (The Atlas Images are quick-look images suitable for deriving positional information but not accurate photometry.) The origin of the magnitude is given by the first character of the rd_flg value.
(MAGNITUDE) 		J MAGNITUDE 2MASS UNC * Corrected photometric uncertainty for the J-band magnitude in the 2MASS survey. If rd_flg[1]=2, this is the measurement error from the profile-fitting procedure, corrected to be consistent with observed repeatability statistics. If rd_flg[1]=1 or 4, this is the RMS of the brightness measured in aperture photometry on the individual frames. If rd_flg=3, the uncertainty is derived from the residuals to the 1-d radial profile fit (averaging over azimuth) to the unsaturated wings of the bright source. If J_MAG_SIG > 8.0, it is a flag value indicating that a meaningful uncertainty could not be determined for the source. This column is null if the magnitude is a 95% confidence upper limit (rd_flg[1]=0 or 6) or if the source is not measurable (rd_flg[1]=9).
(MAGNITUDE) 		H MAGNITUDE 2MASS * H band selected magnitude in the 2MASS survey, or if the source is not detected in the H-band, the 95% confidence upper limit derived from a 4 arcsec radius aperture measurement taken at the position of the source on the Atlas Image. (The Atlas Images are quick-look images suitable for deriving positional information but not accurate photometry.) The origin of the magnitude is given by the second character of the rd_flg value.
(MAGNITUDE) 		H MAGNITUDE 2MASS UNC * Corrected photometric uncertainty for the H-band magnitude in the 2MASS survey. If rd_flg[2]=2, this is the measurement error from the profile-fitting procedure, corrected to be consistent with observed repeatability statistics. If rd_flg[2]=1 or 4, this is the RMS of the brightness measured in aperture photometry on the individual frames. If rd_flg=3, the uncertainty is derived from the residuals to the 1-d radial profile fit (averaging over azimuth) to the unsaturated wings of the bright source. If H_MAG_SIG > 8.0, it is a flag value indicating that a meaningful uncertainty could not be determined for the source. This column is null if the magnitude is a 95% confidence upper limit (rd_flg[2]=0 or 6) or if the source is not measurable (rd_flg[2]=9).
(MAGNITUDE) 		KS MAGNITUDE 2MASS * Ks band selected magnitude in the 2MASS survey, or if the source is not detected in the Ks-band, the 95% confidence upper limit derived from a 4 arcsec radius aperture measurement taken at the position of the source on the Atlas Image. (The Atlas Images are quick-look images suitable for deriving positional information but not accurate photometry.) The origin of the magnitude is given by the third character of the rd_flg value.
(MAGNITUDE) 		KS MAGNITUDE 2MASS UNC * Corrected photometric uncertainty for the Ks-band magnitude in the 2MASS survey. If rd_flg[3]=2, this is the measurement error from the profile-fitting procedure, corrected to be consistent with observed repeatability statistics. If rd_flg[3]=1 or 4, this is the RMS of the brightness measured in aperture photometry on the individual frames. If rd_flg=3, the uncertainty is derived from the residuals to the 1-d radial profile fit (averaging over azimuth) to the unsaturated wings of the bright source. If KS_MAG_SIG > 8.0, it is a flag value indicating that a meaningful uncertainty could not be determined for the source. This column is null if the magnitude is a 95% confidence upper limit (rd_flg[3]=0 or 6) or if the source is not measurable (rd_flg[3]=9).
(MAGNITUDE)
14.276 0.047 13.706 13.199
14.357 0.048 13.738 13.295

Asteroid 6719 Gallaj (top)

Asteroid Absolute Magnitudes V12.0 (1 data product)

ABSOLUTE VISUAL MAGNITUDE * IAU-adopted absolute V magnitude (H)
(MAGNITUDE) 		SLOPE PARAMETER * IAU-adopted slope parameter (G) SLOPE PARAMETER ORIGIN FLAG * Those slope parameters that were determined by fitting the IAU-adopted phase function to data are given an origin code letter of 'f' (for 'fitted'); all others are given a code letter of 'a' (for 'assumed'). MPC REFERENCE * Minor Planet Circular (MPC) or Minor Planet Orbit Supplement (MPO) reference
12.4 0.15 a MPC 28115

Asteroid 6719 Gallaj (top)

Asteroid Dynamical Families V4.1 (1 data product)

ZAPPALA FAMILY NAME * Familiy name in the family analysis of Zappala et al. (1995) ZAPPALA CLUMP FLAG * Indicates whether the Zappala family designation is a clump or a family, as defined in Zappala et al. (1995). F = family, C = clump. ZAPPALA FAMILY CONFIDENCE LEVEL * Confidence level of Zappala family membership, defined as quality code (QC) in Zappala et al. 1995.

Asteroid 6719 Gallaj (top)

Asteroid Lightcurve Derived Data V16.0 (2 data products)

LC PERIOD FLAG * Flag referring to the sidereal period given in the asteroid lightcurve parameters file, taking the following values: > - less than LC PERIOD NOTE * Note with further information about the period given in the asteroid lightcurve parameters file. LC PERIOD * Rotation period of the asteroid about its axis, in hours, in the asteroid lightcurve parameters file. The period given is synodic unless the S flag (sidereal) is set in P_FLAG.
(HOUR) 		LC PERIOD ERR * Error in the rotational period given in the asteroid lightcurve parameters file.
(HOUR) 		LC AMPLITUDE FLAG * A flag pertaining to the amplitude of the lightcurve in the asteroid lightcurve parameters file, given in AMP_MIN and AMP_MAX. - greater than LC AMPLITUDE MINIMUM * Lightcurve amplitude minimum, in the asteroid lightcurve parameters file. In the cases where a range of amplitude is given, this is the lower limit of the range. For individual observations for which a single value of the amplitude is given, this field contains a null value.
(MAGNITUDE) 		LC AMPLITUDE MAXIMUM * Lightcurve amplitude maximum in the asteroid lightcurve parameters file. In cases where a range of amplitudes is given, this field is the upper limit of the range. In cases where a single value is given for the amplitude, this field is that value and a null value is given for AMP_MIN. Both AMP_MIN and AMP_MAX contain a null value if the publication did not include an amplitude.
(MAGNITUDE) 		LC AMPLITUDE ERR * Error in the lightcurve amplitudes given in the asteroid lightcurve parameters file.
(MAGNITUDE) 		LC QUALITY CODE * This code describes the reliability of the lightcurve results in the asteroid lightcurve parameters file, and takes the following values: 0 - Result later proven incorrect. This appears only on records of individual observations. 1 - Result based on fragmentary lightcurve(s), may be completely wrong. 2 - Result based on less than full coverage, so that the period may be wrong by 30 percent or so. Also, a quality of 2 is used to note results where an ambiguity exists as to the number of extrema per cycle or the number of elapsed cycles between lightcurves. Hence the result may be wrong by an integer ratio. 3 - Denotes a secure result with no ambiguity and full lightcurve coverage. 4 - In addition to full coverage, denotes that a pole position is reported. In some cases, the numerical quality code may be followed by a plus or minus sign, indicating that the reliability is judged somewhat better (+) or worse (-) than implied by an un-signed number alone. This refinement in scale has been only recently added, and not yet retroactively, so most entries don't have signs, even in some cases where they would be appropriate. LC NOTES * Notes pertaining to the lightcurve reported in the asteroid lightcurve parameters file. These are one-letter flags, one or more of which may appear in the column. ? - Usually tied with 'T' to indicate uncertainty. 1 - Monomodal curve (one min/max per rotation) 3 - Trimodal curve (three min/max per rotation) 4 - Quadrimodal curve (four min/max per rotation) A - Ambiguous period D - Period determined by us that differs from that given in the original publication E - Occultation observation H - Space telescope observations I - IR/Thermal observations M - Polarimetric observation N - No lightcurve published O - Adaptive optics observation P - Photographic photometry R - Radar observation T - Tumbling (Non-principal axis rotation - see lc_npa.tab for details) V - Visual photometry Additional flags associated with the T flag are as follows: None after the T - The asteroid is definitely tumbling ? : Possible tumbler 0 : The tumbling damping timescale is long enough that tumbling might be expected, but observations are not sufficient to substantiate either tumbling or not tumbling. - : The tumbling damping timescale is long enough that tumbling might be expected, but observations indicate the object is NOT tumbling. + : The tumbling damping timescale is short enough that tumbling would not seem likely, however, observations indicate that it may be tumbling or actually is tumbling. LC BINARY FLAG * Note regarding binarity in the asteroid lightcurve parameters file: ? - Possible, usually due to lacking mutual eclipse/occultation events B - Binary system M - Multiple system, more than two LC REFERENCE ID * A short version of the reference citation for the published paper in which the values in this entry (in the asteroid lightcurve parameters file) were reported. The full citations may be found in the file lc_references.tab.
. I WISE
S 4.429487 0.000001 2 N Durech 2016
. N Veres 2015
4.4305 0.0014 0.95 2 Waszczak 2016

LC REFERENCE ID * A short version of the reference citation for the published paper in which the values in this entry (in the asteroid lightcurve parameters file) were reported. The full citations may be found in the file lc_references.tab. LC SPINAXIS QUALITY CODE * The Q value gives our assessment of the quality of the pole solution. 0 Either wrong or very uncertain determination 1 Possible but not certain pole determination. This will most often appear when a limited number of data sets is used, especially if methods other than lightcurve inversion are involved. 2 Good determination, based on large dataset. The solution consists of one or two solutions (and possibly their 180 degree mirrors). If two solutions, they may differ in both longitude and latitude but not by the simple 180 degree mirror. 3 Very good determination, based on large dataset, an ambiguity of about 180 degrees in pole longitude might appear. 4 Excellent determination, pole position confirmed by methods based on independent datasets (for example, lightcurves and radar data, lightcurves and spacecraft fly-by). P A prograde rotation has been determined but no specific pole position has been determined. This will be followed by a 0 or 1, indicating the quality of the determination. R A retrograde rotation has been determined by no specific pole position has been determined. This will be followed by a 0 or 1, indicating the quality of the determination. In some cases, the numerical quality code is followed by a plus or minus sign, indicating that the reliability is judged somewhat better (+) or worse (-) than implied by an un-signed number alone. If the Q value is blank, the given pole solution has not yet been reviewed under the new rating system. LC PERIOD * Rotation period of the asteroid about its axis, in hours, in the asteroid lightcurve parameters file. The period given is synodic unless the S flag (sidereal) is set in P_FLAG.
(HOUR) 		LC AMPLITUDE MAXIMUM * Lightcurve amplitude maximum in the asteroid lightcurve parameters file. In cases where a range of amplitudes is given, this field is the upper limit of the range. In cases where a single value is given for the amplitude, this field is that value and a null value is given for AMP_MIN. Both AMP_MIN and AMP_MAX contain a null value if the publication did not include an amplitude.
(MAGNITUDE) 		LC SPINAXIS ECLIPTIC LONGITUDE 1 * Ecliptic longitude of the first solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE) 		LC SPINAXIS ECLIPTIC LATITUDE 1 * Ecliptic latitude of the first solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE) 		LC SPINAXIS ECLIPTIC LONGITUDE 2 * Ecliptic longitude of the second solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE) 		LC SPINAXIS ECLIPTIC LATITUDE 2 * Ecliptic latitude of the second solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE) 		LC SPINAXIS ECLIPTIC LONGITUDE 3 * Ecliptic longitude of the third solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE) 		LC SPINAXIS ECLIPTIC LATITUDE 3 * Ecliptic latitude of the third solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE) 		LC SPINAXIS ECLIPTIC LONGITUDE 4 * Ecliptic longitude of the fourth solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE) 		LC SPINAXIS ECLIPTIC LATITUDE 4 * Ecliptic latitude of the fourth solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE) 		LC SPINAXIS SIDEREAL PERIOD * Sidereal period of the spinaxis solution in the spinaxis file of the asteroid derived lightcurve data set.
(HOUR) 		LC SPINAXIS SHAPE FLAG * Flag for shape model in the spinaxis file of the asteroid derived lightcurve data set: Y = shape model exists
summary 9+ 4.4305 0.95
Durech 2016 9+ 60.0 -63.0 252.0 -59.0 4.429487 Y

Asteroid 6719 Gallaj (top)

Asteroid Names and Discovery V12.0 (1 data product)

DISCOVERY DATE * Date of discovery of an object DISCOVERY LOCATION * Location where the discovery observation of an object was made DISCOVERER NAMES * The name(s) of the discoverer(s) of an object
1990-10-16 Nauchnyj Kastel', G. R.

Asteroid 6719 Gallaj (top)

Mothe-Diniz Asteroid Dynamical Families V1.1 (1 data product)

MK RESONANCE FLAG * Resonance flag as defined in Milani and Knesevic 1994, Icarus 107, 219. MK MEAN ELEMENTS QUALITY CODE * Mean elements quality code as defined in Milani and Knesevic 1994, Icarus 107, 219. MK OSCULATING ELEMENTS QUALITY CODE * Osculating elements quality code as defined in Milani and Knesevic 1994, Icarus 107, 219. MOTHEFAM CLUSTER MEMBERSHIP * The cluster membership as defined in the Mothe-Diniz et al. asteroid family data set, based on the name or provisional designation of the lowest-numbered asteroid in the cluster
0 0 0 Chekhov

Asteroid 6719 Gallaj (top)

NEOWISE Diameters and Albedos V1.0 (1 data product)

NEOWISE DIAMETER * NEOWISE best-fit effective spherical diameter, or assumed value if not fitted.
(KILOMETER) 		NEOWISE DIAMETER UNCERTAINTY * NEOWISE unceratinty in the best-fit effective spherical diameter, or assumed value if not fitted.
(KILOMETER) 		NEOWISE V ALBEDO * NEOWISE best-fit visible geometric albedo, or assumed value if not fitted. NEOWISE V ALBEDO UNCERTAINTY * NEOWISE uncertainty of the best-fit visible geometric albedo, or assumed value if not fitted. NEOWISE THERMAL BEAMING PARAMETER * NEOWISE best-fit NEATM thermal beaming parameter, or assumed value if not fitted. NEOWISE THERMAL BEAMING PARAMETER UNCERTAINTY * NEOWISE uncertainty of the best-fit NEATM thermal beaming parameter, or assumed value if not fitted. NEOWISE REFERENCE CODE * NEOWISE reference code to the original publication of fitted parameters. See the refrence.tab in the dataset for the full reference
8.133 0.175 0.203 0.020 1.216 0.036 Mas11

Asteroid 6719 Gallaj (top)

NEOWISE Diameters and Albedos V2.0 (1 data product)

ABSOLUTE VISUAL MAGNITUDE * IAU-adopted absolute V magnitude (H)
(magnitudes) 		SLOPE PARAMETER * IAU-adopted slope parameter (G) OBSERVATION DATE * Date of observation
(day) 		NEOWISE DIAMETER * NEOWISE best-fit effective spherical diameter, or assumed value if not fitted.
(kilometer) 		NEOWISE DIAMETER UNCERTAINTY * NEOWISE unceratinty in the best-fit effective spherical diameter, or assumed value if not fitted.
(kilometer) 		NEOWISE V ALBEDO * NEOWISE best-fit visible geometric albedo, or assumed value if not fitted. NEOWISE V ALBEDO UNCERTAINTY * NEOWISE uncertainty of the best-fit visible geometric albedo, or assumed value if not fitted. NEOWISE THERMAL BEAMING PARAMETER * NEOWISE best-fit NEATM thermal beaming parameter, or assumed value if not fitted. NEOWISE THERMAL BEAMING PARAMETER UNCERTAINTY * NEOWISE uncertainty of the best-fit NEATM thermal beaming parameter, or assumed value if not fitted. NEOWISE REFERENCE CODE * NEOWISE reference code to the original publication of fitted parameters. See the refrence.tab in the dataset for the full reference
12.80 +0.15 2455298.3360670 8.133 0.175 0.203 0.020 1.216 0.036 Mas11

Asteroid 6719 Gallaj (top)

Nesvorny HCM Asteroid Families V3.0 (1 data product)

NESVORNY SYNTHETIC FAMILY NUMBER * Family number assigned for the purpose of the Nesvorny family analysis based on synthetic proper elements. Family numbers in the 400's refer to inner belt families, in the 500's to central belt families, and in the 600's to outer belt families. High inclination families from synthetic proper elements have family numbers in the 700's for the inner belt, the 800's for the central belt, and the 900's for the outer belt. NESVORNY SYNTHETIC FAMILY NAME * The name of the asteroid family in the Nesvorny family analysis based on synthetic proper elements. The family name is based on the name or provisional designation of the largest member of the family.
532 2085 Henan


About FAQ Support/Feedback Acknowledgment
Planetary Data System - Small Bodies Node
Nasa Logo