About FAQ Support/Feedback
Ferret Logo
Search by Target Search by Properties Advanced Search Data Sets

Asteroid 6755 Solov'yanenko

Alternate IDs:
1991 TU4, 1987 ST24, 1976 YE1, 1990 ME2, 1990 MR1, 1972 VU

Data sets with data for Asteroid 6755 Solov'yanenko:

Asteroid 6755 Solov'yanenko (top)

Asteroid Lightcurve Derived Data V16.0 (2 data products)

LC PERIOD FLAG * Flag referring to the sidereal period given in the asteroid lightcurve parameters file, taking the following values: > - less than LC PERIOD NOTE * Note with further information about the period given in the asteroid lightcurve parameters file. LC PERIOD * Rotation period of the asteroid about its axis, in hours, in the asteroid lightcurve parameters file. The period given is synodic unless the S flag (sidereal) is set in P_FLAG.
(HOUR)
LC PERIOD ERR * Error in the rotational period given in the asteroid lightcurve parameters file.
(HOUR)
LC AMPLITUDE FLAG * A flag pertaining to the amplitude of the lightcurve in the asteroid lightcurve parameters file, given in AMP_MIN and AMP_MAX. - greater than LC AMPLITUDE MINIMUM * Lightcurve amplitude minimum, in the asteroid lightcurve parameters file. In the cases where a range of amplitude is given, this is the lower limit of the range. For individual observations for which a single value of the amplitude is given, this field contains a null value.
(MAGNITUDE)
LC AMPLITUDE MAXIMUM * Lightcurve amplitude maximum in the asteroid lightcurve parameters file. In cases where a range of amplitudes is given, this field is the upper limit of the range. In cases where a single value is given for the amplitude, this field is that value and a null value is given for AMP_MIN. Both AMP_MIN and AMP_MAX contain a null value if the publication did not include an amplitude.
(MAGNITUDE)
LC AMPLITUDE ERR * Error in the lightcurve amplitudes given in the asteroid lightcurve parameters file.
(MAGNITUDE)
LC QUALITY CODE * This code describes the reliability of the lightcurve results in the asteroid lightcurve parameters file, and takes the following values: 0 - Result later proven incorrect. This appears only on records of individual observations. 1 - Result based on fragmentary lightcurve(s), may be completely wrong. 2 - Result based on less than full coverage, so that the period may be wrong by 30 percent or so. Also, a quality of 2 is used to note results where an ambiguity exists as to the number of extrema per cycle or the number of elapsed cycles between lightcurves. Hence the result may be wrong by an integer ratio. 3 - Denotes a secure result with no ambiguity and full lightcurve coverage. 4 - In addition to full coverage, denotes that a pole position is reported. In some cases, the numerical quality code may be followed by a plus or minus sign, indicating that the reliability is judged somewhat better (+) or worse (-) than implied by an un-signed number alone. This refinement in scale has been only recently added, and not yet retroactively, so most entries don't have signs, even in some cases where they would be appropriate. LC NOTES * Notes pertaining to the lightcurve reported in the asteroid lightcurve parameters file. These are one-letter flags, one or more of which may appear in the column. ? - Usually tied with 'T' to indicate uncertainty. 1 - Monomodal curve (one min/max per rotation) 3 - Trimodal curve (three min/max per rotation) 4 - Quadrimodal curve (four min/max per rotation) A - Ambiguous period D - Period determined by us that differs from that given in the original publication E - Occultation observation H - Space telescope observations I - IR/Thermal observations M - Polarimetric observation N - No lightcurve published O - Adaptive optics observation P - Photographic photometry R - Radar observation T - Tumbling (Non-principal axis rotation - see lc_npa.tab for details) V - Visual photometry Additional flags associated with the T flag are as follows: None after the T - The asteroid is definitely tumbling ? : Possible tumbler 0 : The tumbling damping timescale is long enough that tumbling might be expected, but observations are not sufficient to substantiate either tumbling or not tumbling. - : The tumbling damping timescale is long enough that tumbling might be expected, but observations indicate the object is NOT tumbling. + : The tumbling damping timescale is short enough that tumbling would not seem likely, however, observations indicate that it may be tumbling or actually is tumbling. LC BINARY FLAG * Note regarding binarity in the asteroid lightcurve parameters file: ? - Possible, usually due to lacking mutual eclipse/occultation events B - Binary system M - Multiple system, more than two LC REFERENCE ID * A short version of the reference citation for the published paper in which the values in this entry (in the asteroid lightcurve parameters file) were reported. The full citations may be found in the file lc_references.tab.
8.1681 0.0004 0.28 0.02 3 Pravec 2014web
. I Masiero 2012
. I WISE
S 8.1680 0.0005 . N Hanus 2016
8.1680 0.0034 0.32 2 Waszczak 2016
. N Veres 2015

LC REFERENCE ID * A short version of the reference citation for the published paper in which the values in this entry (in the asteroid lightcurve parameters file) were reported. The full citations may be found in the file lc_references.tab. LC SPINAXIS QUALITY CODE * The Q value gives our assessment of the quality of the pole solution. 0 Either wrong or very uncertain determination 1 Possible but not certain pole determination. This will most often appear when a limited number of data sets is used, especially if methods other than lightcurve inversion are involved. 2 Good determination, based on large dataset. The solution consists of one or two solutions (and possibly their 180 degree mirrors). If two solutions, they may differ in both longitude and latitude but not by the simple 180 degree mirror. 3 Very good determination, based on large dataset, an ambiguity of about 180 degrees in pole longitude might appear. 4 Excellent determination, pole position confirmed by methods based on independent datasets (for example, lightcurves and radar data, lightcurves and spacecraft fly-by). P A prograde rotation has been determined but no specific pole position has been determined. This will be followed by a 0 or 1, indicating the quality of the determination. R A retrograde rotation has been determined by no specific pole position has been determined. This will be followed by a 0 or 1, indicating the quality of the determination. In some cases, the numerical quality code is followed by a plus or minus sign, indicating that the reliability is judged somewhat better (+) or worse (-) than implied by an un-signed number alone. If the Q value is blank, the given pole solution has not yet been reviewed under the new rating system. LC PERIOD * Rotation period of the asteroid about its axis, in hours, in the asteroid lightcurve parameters file. The period given is synodic unless the S flag (sidereal) is set in P_FLAG.
(HOUR)
LC AMPLITUDE MAXIMUM * Lightcurve amplitude maximum in the asteroid lightcurve parameters file. In cases where a range of amplitudes is given, this field is the upper limit of the range. In cases where a single value is given for the amplitude, this field is that value and a null value is given for AMP_MIN. Both AMP_MIN and AMP_MAX contain a null value if the publication did not include an amplitude.
(MAGNITUDE)
LC SPINAXIS ECLIPTIC LONGITUDE 1 * Ecliptic longitude of the first solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE)
LC SPINAXIS ECLIPTIC LATITUDE 1 * Ecliptic latitude of the first solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE)
LC SPINAXIS ECLIPTIC LONGITUDE 2 * Ecliptic longitude of the second solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE)
LC SPINAXIS ECLIPTIC LATITUDE 2 * Ecliptic latitude of the second solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE)
LC SPINAXIS ECLIPTIC LONGITUDE 3 * Ecliptic longitude of the third solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE)
LC SPINAXIS ECLIPTIC LATITUDE 3 * Ecliptic latitude of the third solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE)
LC SPINAXIS ECLIPTIC LONGITUDE 4 * Ecliptic longitude of the fourth solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE)
LC SPINAXIS ECLIPTIC LATITUDE 4 * Ecliptic latitude of the fourth solution in the spinaxis file of the asteroid derived lightcurve data set
(DEGREE)
LC SPINAXIS SIDEREAL PERIOD * Sidereal period of the spinaxis solution in the spinaxis file of the asteroid derived lightcurve data set.
(HOUR)
LC SPINAXIS SHAPE FLAG * Flag for shape model in the spinaxis file of the asteroid derived lightcurve data set: Y = shape model exists
summary 9+ 8.1681 0.28
Hanus 2016 9+ 224.0 54.0 47.0 58.0 8.1680

Asteroid 6755 Solov'yanenko (top)

Asteroid Names and Discovery V12.0 (1 data product)

Asteroid 6755 Solov'yanenko (top)

SDSS Moving Object Catalog V3.0 (1 data product)

SDSS U MAGNITUDE * SDSS u' psf magnitude. The SDSS u' filter has effective wavelength 3540 angstroms and FWHM 570 angstroms. The psf (point spread function) magnitude is calculated from the total flux determined by a point spread fuction fitting procedure.
(MAGNITUDE)
SDSS U ERROR * SDSS u' magnitude error.
(MAGNITUDE)
SDSS G MAGNITUDE * SDSS g' psf magnitude. The SDSS g' filter has effective wavelength 4770 angstroms and FWHM 1370 angstroms. The psf (point spread function) magnitude is calculated from the total flux determined by a point spread fuction fitting procedure.
(MAGNITUDE)
SDSS G ERROR * SDSS g' magnitude error.
(MAGNITUDE)
SDSS R MAGNITUDE * SDSS r' psf magnitude. The SDSS r' filter has effective wavelength 6230 angstroms and FWHM 1370 angstroms. The psf (point spread function) magnitude is calculated from the total flux determined by a point spread fuction fitting procedure.
(MAGNITUDE)
SDSS R ERROR * SDSS r' magnitude error.
(MAGNITUDE)
SDSS I MAGNITUDE * SDSS i' psf magnitude. The SDSS i' filter has effective wavelength 7630 angstroms and FWHM 1530 angstroms. The psf (point spread function) magnitude is calculated from the total flux determined by a point spread fuction fitting procedure.
(MAGNITUDE)
SDSS I ERROR * SDSS i' magnitude error.
(MAGNITUDE)
SDSS Z MAGNITUDE * SDSS z' psf magnitude. The SDSS z' filter has effective wavelength 9130 angstroms and FWHM 950 angstroms. The psf (point spread function) magnitude is calculated from the total flux determined by a point spread fuction fitting procedure.
(MAGNITUDE)
SDSS Z ERROR * SDSS z' magnitude error.
(MAGNITUDE)
SDSS A COLOR * SDSS a* color. See Ivezic et al. 2001 [IVEZICETAL2001] AJ 122, 2749-2784.
(MAGNITUDE)
SDSS A ERROR * SDSS a* color error
(MAGNITUDE)
SDSS V MAGNITUDE * Johnson V-band magnitude synthesized from SDSS colors using V = r + 0.44*(g-r) - 0.02
(MAGNITUDE)
SDSS B MAGNITUDE * Johnson B-band magnitude synthesized from SDSS colors using B = V + 1.04*(g-r) + 0.19
(MAGNITUDE)
18.96 0.02 17.21 0.02 16.45 0.01 16.18 0.01 16.20 0.01 0.23 0.02 16.77 17.75


About FAQ Support/Feedback Acknowledgment